5.3.3. mvr group

Syntax

mvr group <ip-address>[<1-128>]

Parameter

Default

<ip-address> Start MVR IP multicast address

[<1-128>] Contiguous series of IP addresses.

Mode

Global Configuration

Usage

Use the mvr group command to configure mvr group address range when mvr is enabled. The command will delete all mvr vlan ipv4 group entry You can verify settings by the show mvr command

Example

The following example specifies that set mvr group range is 224.1.1.1~224.1.1.8.

Switch(config)# mvr
Switch(config)# mvr group 224.1.1.1 8
The operation will delete the MVR VLAN groups include static MVR groups.Continue? [yes/no]:y
Switch# show mvr
MVR Running : Enabled
MVR Multicast VLAN : 2
MVR Group Range : 224.1.1.1 ~ 224.1.1.8
MVR Max Multicast Groups : 128
MVR Current Multicast Groups : 0
MVR Global query response time : 1 sec
MVR Mode : compatible