3.7.6. voice-vlan cos (per interface)

Syntax

voice-vlan cos ( src | all )

no voice-vlan cos

Parameter

src Specify QoS attributes are applied to packets with OUIs in the source MAC address. All Specify QoS attributes are applied to packets that are classified to the Voice VLAN.

Default

The default all port in Src mode.

Mode

Interface configuration

Usage

Use the voice vlan cos Interface configuration command to configure OUI voice VLAN cos mode configuration on an interface Use the “no” form to restore to default mode. You can verify your setting by entering the show voice-vlan interfaces command.

Example

The following example how to configure voice packet QoS attributes on an interface.

Switch(config)# interface range gi1-3
Switch(config-if)# voice-vlan cos all
Switch# show voice-vlan interfaces gi1-8
Voice VLAN Aging : 1440 minutes
Voice VLAN CoS : 6
Voice VLAN 1p Remark: disabled
OUI table
OUI MAC | Description
--------------+-----------------
00:E0:BB | 3COM
00:03:6B | Cisco
00:E0:75 | Veritel
00:D0:1E | Pingtel
00:01:E3 | Siemens
00:60:B9 | NEC/Philips
00:0F:E2 | H3C
00:09:6E | Avaya
Port | State | Port Mode | Cos Mode
-------+----------+-------------+-----------
gi1 | Disabled | Auto | All
gi2 | Disabled | Auto | All
gi3 | Disabled | Auto | All
gi4 | Disabled | Auto | Src
gi5 | Disabled | Auto | Src
gi6 | Disabled | Auto | Src
gi7 | Disabled | Auto | Src
gi8 | Disabled | Auto | Src