3.9.3. surveillance-vlan vlan

Syntax

surveillance-vlan vlan <1-4094>

no surveillance-vlan vlan

Parameter


<1-4094> Specify the Surveillance VLAN ID


Default

The default Surveillance VLAN ID is None.

Mode

Global Configuration

Usage

Use the surveillance vlan id global configuration command to configure the VLAN identifier of the surveillance VLAN statically. Use the no form of this command to restore surveillance VLAN id to default. You can verify your setting by entering the show surveillance vlan.

Example

The following example shows how to set Surveillance VLAN id. The VLAN id must be created first.

Switch(config)# surveillance-vlan vlan 128
Switch# show surveillance-vlan
Administrate Surveillance VLAN state : enabled
Surveillance VLAN ID 128
Surveillance VLAN Aging : 1440 minutes
Surveillance VLAN CoS 6
Surveillance VLAN 1p Remark: disabled