3.9.2. surveillance-vlan (per interface)

Syntax

surveillance-vlan s no surveillance-vlan

Parameter

Default

Disable by default.

Mode

Interface Configuration

Usage

Use the surveillance vlan Interface configuration command to enable OUI surveillance VLAN configuration on an interface Use the no form of this command to disable Surveillance VLAN on an interfaces You can verify your setting by entering the show surveillance vlan command.

Example

The following example how to enable Surveillance VLAN function in oui mode on an interface.

Switch(config)# interface range gi1-3
Switch(config-if)# surveillance-vlan
Switch# show surveillance-vlan interfaces gi1-3
Surveillance VLAN Aging : 1440 minutes
Surveillance VLAN CoS 7
Surveillance VLAN 1p Remark: enabled
OUI table
OUI MAC | Description
-------------------+-----------------
00:01:02 | Test
Port | State | Port Mode | Cos Mode
---------+-----------+-----------------+-----------
gi1 | Disabled | Auto | Src
gi2 | Disabled | Auto | Src
gi3 | Disabled | Auto | Src