8.1.9. show qos interface

Syntax

show qos interface IF_PORTS

Parameter


IF_PORTS Select port to show qos configurations.


Default

No default value for this command.

Mode

Privileged EXEC

Usage

Use “show qos interfaces” command to show port default cos, remarking state and remarking type state informations.

Example

This example shows how to show qos configurations on interface fa1.

Switch# show qos interface GigabitEthernet 1
Port | CoS | Trust State | Remark Cos | Remark DSCP | Remark IP Prec
--------+-------+---------------+------------+-------------+-------
gi1 | 7 | enabled | disabled | disabled | disabled |