7.1.1. lldp

Syntax

lldp

no lldp

Parameter

Default

Default is enabled

Mode

Global Configuration

Usage

Use “lldp” command to enable LLDP RX/TX ability. The LLDP enable status is displayed by “show lldp” command.

Example

The following example sets LLDP enable/disable.

Switch(config)# lldp
Switch# show lldp
State: Enabled Timer: 30 Seconds
Hold multiplier: 4 Reinit delay: 2 Seconds Tx delay: 2 Seconds
LLDP packet handling: Flooding
Port |State | Optional TLVs | Address
-------- + ------ + -------------- + --------
fa1 | RX,TX | |192.168.1.2
fa2 | RX,TX | |192.168.1.2
fa3 | RX,TX | |192.168.1.2
fa4 | RX,TX | |192.168.1.2
fa5 |RX,TX | |192.168.1.2