6.1.11. radius default-config

Syntax

radius default-config [key TACACSKEY] [timeout <1-30>]

Parameter

key RADIUSKEY Specify default radius server key string

retransmit <1-10> Specify default radius server retransmit value

timeout <1-30> Specify default radius server timeout value

Default

Default radius key is “”.

Default radius retransmit is 3 times. Default radius timeout is 3 seconds.

Mode

Global Configuration

Usage

Use radius default-config command to modify default values of radius server. These default values will be used when user try to create a new radius server and not assigned these values.

Example

This example shows how modify default radius configuration

Switch(config)# radius default-config timeout 20
Switch(config)# radius default-config key radiuskey
Switch(config)# radius default-config retransmit 5

This example shows how to create a new radius server with above default config and show results.

Switch(config)# radius host 192.168.1.111
Switch# show radius
Prio |IP Address| Auth-Port| Retries| Timeout| Usage-Type| Key
------+-----------------+----------+--------+--------+-----------+----
1 |192.168.1.111 | 1812 | 5 | 20 | All | radiuskey