5.3.5. mvr query-time

Syntax

mvr query-time <1-10>

no mvr query-time

Parameter

<1-10> specifies query response time is 1~10 sec.

Default

Default is 1 sec

Mode

Global Configuration

Usage

Use the mvr query-time command to configure when mvr is enabled. Use the no form of this command to set query-time default value. You can verify settings by the show mvr command.

Example

The following example specifies that set mvr query-time 10 sec.

Switch(config)# mvr
Switch(config)# mvr query-time 10
Switch# show mvr
MVR Running : Enabled
MVR Multicast VLAN : 2
MVR Group Range : 224.1.1.1 ~ 224.1.1.8
MVR Max Multicast Groups : 128
MVR Current Multicast Groups : 0
MVR Global query response time : 10 sec
MVR Mode : dynamic