3.7.2. voice-vlan (per interface)

Syntax

voice-vlan

no voice-vlan

Parameter

Default

The default all port admin-staus is disabled.

Mode

Interface Configuration

Usage

Use the voice vlan Interface configuration command to enable OUI voice VLAN configuration on an interface Use the no form of this command to disable voice vlan on interfaces. You can verify your setting by entering the show voice vlan command.

Example

The following example how to enable voice VLAN function in oui mode on an interface.

Switch(config)# interface range gi1-3
Switch(config-if)# voice-vlan
Switch# show voice-vlan interfaces gi1-8
Voice VLAN Aging : 1440 minutes
Voice VLAN CoS 7
Voice VLAN 1p Remark: enabled
OUI table
OUI MAC | Description
--------------------+-----------------
00:E0:BB | 3COM
00:03:6B | Cisco
00:E0:75 | Veritel
00:D0:1E | Pingtel
00:01:E3 | Siemens
00:60:B9 | NEC/Philips
00:0F:E2 | H3C
00:09:6E | Avaya
Port | State | Port Mode | Cos Mode
-------+----------+-------------+-----------
gi1 | Disabled | Auto | Src
gi2 | Disabled | Auto | Src
gi3 | Disabled | Auto | Src
gi4 | Disabled | Auto | Src
gi5 | Disabled | Auto | Src
gi6 | Disabled | Auto | Src
gi7 | Disabled | Auto | Src
gi8 | Disabled | Auto | Src