3.4.19. show interface switchport

Syntax

show interface switchport interfaces IF_PORTS

Parameter


IF_PORTS Specify interfaces protocol vlan to display


Default

Mode

Privileged EXEC

Usage

Display information about default vlan

Example

The following example specifies that show interfacce switchport.

Switch(config)# interface gi10
Switch(config-if)# switchport trunk allowed vlan add 100
Switch# show interfaces switchport gi10
Port : gi10
Port Mode : Trunk
Ingress Filtering : enabled
Acceptable Frame Type : all
Ingress UnTagged VLAN ( NATIVE ) : 1
Trunking VLANs Enabled: 100
Port is member in:
Vlan Name Egress rule
------- ----------------------- ----------------
1 default Untagged
100 VLAN-one-hundred Tagged
Forbidden VLANs:
Vlan Name