3.4.4. switchport hybrid pvid

Syntax

switchport hybrid pvid <1-4094>

Parameter

<1-4094 Specify the port-based VLAN ID on the Hybrid port.

Default

Default pivd is 1.

Mode

Port Configuration

Usage

Use the switch hybrid pivd port configuration command to set pvid of interface. You can verify your setting by entering the show interface switchport command.

Example

This example sets PVID to 100.

Switch(config)# interface gi10
Switch(config-if)# switchport mode hybrid
Switch(config-if)# switchport hybrid pvid 100
Switch# show interface switchport fa10
Port : gi10
Port Mode : Hybrid
Ingress Filtering : enabled
Acceptable Frame Type : all
Ingress UnTagged VLAN ( NATIVE ) : 100
Trunking VLANs Enabled:
Port is member in:
Vlan Name Egress rule
------- ----------------------- -----------------
1 default Untagged
Forbidden VLANs:
Vlan Name