3.9.6. surveillance-vlan cos (per interface)

Syntax

surveillance-vlan cos ( src | all )

no surveillance-vlan cos

Parameter

src Specify QoS attributes are applied to packets with OUIs in the source MAC address.

all Specify QoS attributes are applied to packets that are classified to the Surveillance VLAN.

Default

The default all port in Src mode.

Mode

Interface configuration

Usage

Use the surveillance vlan cos mode Interface configuration command to configure OUI surveillance VLAN cos mode configuration on an interface. Use the “no” form to restore to default mode. You can verify your setting by entering the show surveillance-vlan interfaces Privileged EXEC command

Example

The following example how to configure surveillance packet QoS attributes on an interface.

Switch(config)# interface range gi1-3
Switch(config-if)# surveillance-vlan cos all
Switch# show surveillance-vlan interfaces gi1-3
Surveillance VLAN Aging : 1440 minutes
Surveillance VLAN CoS 7
Surveillance VLAN 1p Remark: enabled
OOUI table
OUI MAC | Description
-------------------+-----------------
00:01:02 | Test
Port | State | Port Mode | Cos Mode
---------+-----------+-----------------+-----------
gi1 | Disabled | Auto | All
gi2 | Disabled | Auto | All
gi3 | Disabled | Auto | All