3.8.2. gvrp (per interface)

Syntax

gvrp

no gvrp

Parameter

Default

GVRP is disabled on interface

Mode

Interface mode

Usage

‘no gvrp’ will remove dynamic port from vlan. ‘gvrp’ must work at port mode is trunk.

Example

The following example specifies that set port gvrp . The port gvrp enable must set port mode is trunk firstly.

Switch(config)# interface gi1
Switch(config-if)# switchport mode trunk
Switch(config)# gvrp
Switch# show gvrp configuration interfaces gi1
Port | GVRP-Status | Registration | Dynamic VLAN Creation
--------+---------------+---------------+----------------------
gi1 Enabled Normal Disabled